National Repository of Grey Literature 14 records found  1 - 10next  jump to record: Search took 0.00 seconds. 
Boarding house Pamferova Huť
Trojáková, Michaela ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
This diploma thesis describes the design and processing of project documentation pension. The proposed facility is located in the village of Železná Ruda- Pamferova Hut. The site is widely used by tourists in winter and summer. This is partly basement building, which has 2 storeys and an attic. The roof is designed as a gabled dormer with a flat roof. The building is based on the footings of plain concrete and under the reinforced concrete pillars are designed shoe. Supporting, peripheral and partition walls are designed from sand-lime bricks SENDWIX. An exception is peripheral walls of the basement, which is in contact with soil, which is designed as a lost formwork. In the dining area, which has an open reinforced concrete columns. Ceiling structure will consist of prestressed ceiling panels SPIROLL. Perimeter walls are insulated using external thermal insulation composite system using insulation from stone wool. The building is functionally divided into three main parts with a common main entrance. The first part is a restaurant with a kitchen, storage and kitchen facilities. This section is designed restaurants with a total capacity of 26 persons, the capacity will be in the summer to expand the possible capacity of the terrace, which belongs to the dining room. It is also proposed sanitary facilities for visitors to the restaurant, kitchen with storage and facilities for staff. The second part is the wellness center, which consists of a gym and rooms with infrared sauna and whirlpool. This section is designed sanitary facilities for visitors separated for men and women. The last part of the pension, which used to accommodate 30 people and the background of the pension. Backgrounds pension means any technical equipment room, storage room for bikes and skis, and not least the individual room house, which also includes a room for personal hygiene. This thesis was created with an emphasis on a correct layout and architectural design, static requirements an
The villahouse in Polička
Svoboda, Jan ; Kozáček, Martin (referee) ; Brukner, Bohuslav (advisor)
This bachelor thesis deals with the processing of project documentation for a new building called VillaHouse. The building is located in the southeastern part of the City of Polička. This is a three-story apartment building with a flat roof. The building has main and side entrances. The main entrance to the building is wheelchair accessible. The first floor has been designed with storage areas as well as a staircase and vestibule. The second and third floors are designed with 6 separate apartments. The apartments are of different size categories (2 + 1, 3 + 1, 1 + kc, 2 + kc and 2 x 3 + kc). The building has sheltered parking for 6 cars. The footings of the building are made of plain concrete. The supporting and perimeter walls are made from ceramic blocks. The ceiling constructions are made of prestressed reinforced concrete panels SPIROLL. The external walls are insulated with contact insulation ETICS.
Multifunctional building in Staré Ransko, interiour and finishing works
Kudiovský, Filip ; Dvořák, Miloslav (referee) ; Šlanhof, Jiří (advisor)
The subject of the Bachelor thesis is the solution of technological phase of interior and finishing works in the multifunctional object in Staré Ransko. The thesis is concentrated on the implementation of the floor structures. At first from the implementing hydro insulation to the stepping plies, which are created by vinyl and pavement. The building will serve for accommodation (four flats 2+1) and for training of company employees. The thesis deals with the technical report of selected building, the situation of transport links, the item budget with a bill of quantities, the technological specification for floor construction, the solution of organization of construction, the construction site, the time schedule, the proposal of the mechanical assembly, the quality solution, the occupation safety and the comparison of the two sort of flooring.
Sports centre Polička
Svoboda, Jan ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.
Family house Rb -3
Růžička, Jiří ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
The project is design a house with a small establishment. The project includes the layout and the design of the house. The house has three floors with an attic and one basement floor. It is designed as a stand-alone. The first floor of the establishment of the background and the main entrance to the house. The rest of the house is designed for family living. This part is a utility room, basement and garage in the basement. Living room with household equipment is then in the upper part of the house. The house is run by two separate entrances with wheelchair access to the premises and the entrance to the garage in the basement. The house is designed as a brick building of brick masonry Porotherm in modular size 250 (125) mm with ceramic ceilings MIAKO a cylinder. Roofed by a gabled roof. The house is located on a private plot of 1200 m2 with built up area of 120 m2. The land is gently sloping.
Comparison of technical characteristics and technology of laying light building materials for floor construction
Mikulica, Karel ; Fiala, Oldřich (referee) ; Hela, Rudolf (advisor)
This graduation thesis is aimed to presentation heat isolation materials for the floor constructions. The experimental part is devoted physical - mechanical properties suggested very light concretes with the cement. The main part of the thesis is devoted to form of the transit and putting of the individual heat isolation materials. In the end are suggested structures of the floor constructions with the respect to their properties and price.
Multifunctional house in Karlovy Vary
Růžička, Jiří ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The project solves a multifunctional Duma building in a vacant lot, contemplated the construction site is located in Carlsbad, in the street Vyhlíce. This is a protected site spa. Part of the project's layout and structural design of the house. It is a six-storey house with an attic and a basement floor. It is designed as a free-standing in the gap as the final house. The layout is divided into two complete units with their own input. There are spaces for business and residential units for permanent housing. Part of the living area are also room house equipment. Inputs to both parts are wheelchair accessible. The house is not wheelchair The house is designed as a brick building of brick masonry Porotherm the module dimensions of 250 (125) mm with reinforced concrete ceilings. Roofed by a hipped roof. The house is located on a private plot of 519 m2 built-up area of 221 m2. The land is gently sloping. The main orientation of the building to the cardinal's east and west. The south wall is adjacent to the neighboring house.
Boarding house Pamferova Huť
Trojáková, Michaela ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
This diploma thesis describes the design and processing of project documentation pension. The proposed facility is located in the village of Železná Ruda- Pamferova Hut. The site is widely used by tourists in winter and summer. This is partly basement building, which has 2 storeys and an attic. The roof is designed as a gabled dormer with a flat roof. The building is based on the footings of plain concrete and under the reinforced concrete pillars are designed shoe. Supporting, peripheral and partition walls are designed from sand-lime bricks SENDWIX. An exception is peripheral walls of the basement, which is in contact with soil, which is designed as a lost formwork. In the dining area, which has an open reinforced concrete columns. Ceiling structure will consist of prestressed ceiling panels SPIROLL. Perimeter walls are insulated using external thermal insulation composite system using insulation from stone wool. The building is functionally divided into three main parts with a common main entrance. The first part is a restaurant with a kitchen, storage and kitchen facilities. This section is designed restaurants with a total capacity of 26 persons, the capacity will be in the summer to expand the possible capacity of the terrace, which belongs to the dining room. It is also proposed sanitary facilities for visitors to the restaurant, kitchen with storage and facilities for staff. The second part is the wellness center, which consists of a gym and rooms with infrared sauna and whirlpool. This section is designed sanitary facilities for visitors separated for men and women. The last part of the pension, which used to accommodate 30 people and the background of the pension. Backgrounds pension means any technical equipment room, storage room for bikes and skis, and not least the individual room house, which also includes a room for personal hygiene. This thesis was created with an emphasis on a correct layout and architectural design, static requirements an
Multifunctional house in Karlovy Vary
Růžička, Jiří ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The project solves a multifunctional Duma building in a vacant lot, contemplated the construction site is located in Carlsbad, in the street Vyhlíce. This is a protected site spa. Part of the project's layout and structural design of the house. It is a six-storey house with an attic and a basement floor. It is designed as a free-standing in the gap as the final house. The layout is divided into two complete units with their own input. There are spaces for business and residential units for permanent housing. Part of the living area are also room house equipment. Inputs to both parts are wheelchair accessible. The house is not wheelchair The house is designed as a brick building of brick masonry Porotherm the module dimensions of 250 (125) mm with reinforced concrete ceilings. Roofed by a hipped roof. The house is located on a private plot of 519 m2 built-up area of 221 m2. The land is gently sloping. The main orientation of the building to the cardinal's east and west. The south wall is adjacent to the neighboring house.
Multifunctional building in Staré Ransko, interiour and finishing works
Kudiovský, Filip ; Dvořák, Miloslav (referee) ; Šlanhof, Jiří (advisor)
The subject of the Bachelor thesis is the solution of technological phase of interior and finishing works in the multifunctional object in Staré Ransko. The thesis is concentrated on the implementation of the floor structures. At first from the implementing hydro insulation to the stepping plies, which are created by vinyl and pavement. The building will serve for accommodation (four flats 2+1) and for training of company employees. The thesis deals with the technical report of selected building, the situation of transport links, the item budget with a bill of quantities, the technological specification for floor construction, the solution of organization of construction, the construction site, the time schedule, the proposal of the mechanical assembly, the quality solution, the occupation safety and the comparison of the two sort of flooring.

National Repository of Grey Literature : 14 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.